Rosewill RNX-G200 사용자 설명서

RNX-G100 / RNX-G200 / RNX-G300(E)    

                                                                                                                                    User  Manual 

 

 

5 

z  Open your PC case and locate an available PCI on the motherboard. 
z  Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot’s 

contacts. You may have to apply a bit of pressure to slide the adapter all the way in. after the 
adapter is firmly in place, secure its fastening tab to your PC’s chassis with a mounting screw. 
Then close your PC. 

z  Attach the external antenna to the adapter’s antenna port. 
z  Power on the PC. 

 

Figure 3-3 

 

z  If the Found New Hardware Wizard displays, choose install the software automatically 

(Recommended), and click Next button. The driver will be installed automatically. 

 
 
 

z  Power on your PC, let the operating system boot up completely, and login as needed. 
z  Hold the adapter and insert it into a USB slot.   
z  If the Found New Hardware Wizard displays, choose install the software automatically 

(Recommended), and click Next button. The driver will be installed automatically. 

 

Figure 3-4 

 

You have now completed the driver and hardware installation for the Adapter 
 

z  The Wireless Client Configuration Utility screen will appear automatically.