Ricoh VG1398501 사용자 설명서
![Ricoh](https://files.manualsbrain.com/attachments/5d75c15ccccf2674dc37d8acfe0fae2e288880f8/common/fit/150/50/7e2e9af8081fa1a72a9fce0a1dbc35e689c173f116f15720716c2ad6d183/brand_logo.png)
Installing Options
56
Attaching Memory Unit Type D 128MB,
Memory Unit Type E 256MB (SDRAM
Module)
Memory Unit Type E 256MB (SDRAM
Module)
❒ Before touching the memory unit, ground yourself by touching something met-
al to discharge any static electricity. Static electricity can damage the memory
unit.
unit.
❒ Do not subject the memory unit to physical shocks.
❒ Available memory varies depending on model type.
❒ Before using the new memory unit, you must make settings in the printer driv-
❒ Available memory varies depending on model type.
❒ Before using the new memory unit, you must make settings in the printer driv-
er.
A
Turn off the power, and then unplug the power cable.
B
Remove the two screws securing the controller board to the back of the
printer.
printer.
❒ These screws will be used again in step
to secure the controller board.
• Do not touch the inside of the controller board compartment. Doing so may
cause a malfunction or a burn.