Maxtor 800 사용자 설명서

 

28

 

 

After a moment, the computer will recognize that your 
drive is connected and the drive icon will appear on the 
desktop of your Macintosh.

 

From the desktop, drag the drive icon to the Trash. 

The drive will disappear from the desktop.

Disconnect your drive from the computer.

 

Make sure the drive is turned on and that both blue 
lights are illuminated. 

 

Plug the FireWire or USB cable into the drive and your 
computer. 

After a moment, the computer will recognize that your 
drive is connected and the drive icon will appear in the 
My Computer window.

 

Double-click the Windows Unplug or Eject Hardware 
icon in your system icon tray located at the bottom right 
corner of your desktop. 

A list of device choices appears. 

 

Select the Maxtor drive and follow the on-screen 
directions to eject the drive.

The system will display a message saying that you can 
safely remove the drive.

 

Disconnect the drive from your computer.

Your system may not allow you to disconnect the drive. In 
this case, you may need to close all open applications and 
documents or shut down your system completely to 
disconnect the drive safely. Removing the drive from your 
computer without disconnecting it properly through the 
operating system can result in lost or damaged files. 

 

Your new untitled drive appears in the same way as your other 
drives, with a new drive letter assigned by the operating system. 
The assigned letter will vary depending upon the number of other 
drives connected to your computer. Make a mental note of this 
drive letter. It

 

∂

 

s a good idea to name your new drive, so that is easy 

identify later when you use it for backing up your files.

 

On your desktop, click on the name of the new drive’s 
icon. The text will be to highlighted.

 

Enter a name (for example “Maxtor”) for your drive and 
press 

 

.

Unplug or Eject 
Hardware icon