IBM 243X 사용자 설명서

nugget

39

You can use the status icons on the right side of the screen to monitor the status of
battery power, special keys, and network communications. The status icons only turn on
to indicate the current status. When the 243X is off, the icons are also off.

Battery

Network Connect

Network Transmit

Modifier Key

Caps Lock

User Defined

243XU032.eps

Battery    This icon remains off when you have a charged battery pack in the terminal.
The icon turns on when there is a low battery charge and the terminal is on. When the
terminal beeps once every 15 seconds, replace the battery pack with a charged battery
pack or charge the battery pack as soon as possible.

Network Connect    This icon tells you if the 2435 is connected to your network. The
Network Connect status icon may be off, blinking, or on.

TCP/IP

Not connected.

Nothing

Connected to an
access point.

UDP Plus

Not connected.

Connected to an
access point, but
not to a DCS 30X.

Connected to a
DCS 30X.

When the Network Connect icon is off, you are not connected to the network. Make
sure the Network Activate command is enabled and that the terminal is configured
correctly for your RF network. Make sure that you are in range of an access point.

In a UDP Plus network, this icon is not instantaneously updated, but it does tell you
the communications status the last time data was sent or received from the 2435.