Hawking Technology HWU54G 사용자 설명서

 

7 

The Configuration Utility is a powerful application that helps you configure the adapter and monitor the 

link status and the statistics during the communication process. 

 

However, there are some restrictions on the utility. Before using the utility, you should study and learn 

them. 

1. 

If you want to connect to an 11g (54Mbps) network, please ensure to install the adapter to a PC or 

laptop with an USB 2.0 interface. This adapter can only support 11b when connected to a USB 

1.1/1.0 port on your computer. 

2. 

This adapter will only work in 11b (11Mbps) mode w hen Ad Hoc mode has been selected as the 

network type. (Defined by the Wi -Fi organization). If you want to enable the data rate up to 54Mbps 

(11g), please follow steps listed below. 

A.   Go to “Network Connections”. 

B.  Right Click the “Wireless Network Connection” and select “Properties”. 

C.  From the pop-up screen, click “Configure”. 

D.  Enter into “Advanced” page of the “Properties” screen. 

E.  Change the setting of “IBSS Originator Phy-Mode” from “802.11b” to “802.11g”. 

 

 

From the “General” screen, you can view all the information of the network you are connecting to.