IBM EtherLink XL 사용자 설명서
Remote Wake-Up
1-3
Remote Wake-Up
Remote Wake-Up support is enabled for the 3C905B-TX
adapter. If you are using the 3C905B-TX adapter in a PC
that supports Remote Wake-Up through the PCI bus, the
adapter will respond to a remote Wake-Up command or
magic packet signal from a sleep state.
adapter. If you are using the 3C905B-TX adapter in a PC
that supports Remote Wake-Up through the PCI bus, the
adapter will respond to a remote Wake-Up command or
magic packet signal from a sleep state.
Installation and Configuration
The 3Com NIC Diagnostics program allows you to test
the 3C905B-TX adapter, configure it, and display the
adapter configuration information. If you are running DOS,
you cannot use this program.
the 3C905B-TX adapter, configure it, and display the
adapter configuration information. If you are running DOS,
you cannot use this program.
The NIC Diagnostics Help system includes the 3C905B-TX
adapter Release Notes, Frequently Asked Questions, and
KnowledgeBase.
adapter Release Notes, Frequently Asked Questions, and
KnowledgeBase.
Microsoft Windows 95
detects the 3C905B-TX adapter and
installs the network driver from 3Com EtherDisk Diskette #2.
The AutoLink
™
installation software automatically installs
all Novell
NetWare
DOS ODI client software into your
operating system.
10/100 Mbps Support
The single RJ-45 connector on the network cable supports
10 Mbps or 100 Mbps speeds.
10 Mbps or 100 Mbps speeds.
NWay auto-negotiation enables the 3C905B-TX adapter to
automatically run at the speed that the connected hub
supports. The 3C905B-TX adapter works with products that
comply with IEEE 10BASE-T and 100BASE-TX specifications.
automatically run at the speed that the connected hub
supports. The 3C905B-TX adapter works with products that
comply with IEEE 10BASE-T and 100BASE-TX specifications.