HP (Hewlett-Packard) 1100dtn 사용자 설명서

ENWW

2

Using the printer

In this section you will learn how to use the printer driver to change printer settings and to 
perform basic printer tasks. You will also learn about the special media that you can use with 
the printer and how to print on that media.

Before you use the printer, take some time to familiarize yourself with the various media you 
can use.

The printer is designed to work well with most types of office paper and with 25 percent cotton 
bond paper. It is best to test a variety of print media types before buying large quantities. Find 
a media type that works well and is easy to purchase.

Use HP media for optimum print quality. These print media types are specifically designed to 
work well with the printer. For ordering information and part numbers, see 

For the best results, observe the following guidelines:

z

Always use paper that conforms to the printer specifications. For a list of supported media, 
see 

 and 

z

Load only one paper type at a time into a tray.

z

In Tray 1 and Tray 2, load media print-side down with the right edge of the media aligned 
against the right edge and front guide of the tray. See 

z

Load no more than 150 sheets of media into Tray 1. If Tray 2 is installed, load no more 
than 250 sheets of plain paper into it.

z

Do not use media that is damaged, curled, or wrinkled. Do not use paper with cutouts or 
perforations or paper that is heavily textured or embossed. These types of media can 
cause jams and other problems.

z

Do not use paper that is too lightweight or stretches easily. These types of paper can feed 
improperly or jam. See 

z

Do not use multipart forms.

z

Paper that is heavily textured or does not accept ink well can cause poorly filled graphics 
or text.