Insignia NS-PU98505 전단

Thank you for purchasing this high quality Insignia USB to Ethernet 
Adapter. Use this adapter to instantly connect to a 10/100 Mbps network 
from the USB port on your desktop or laptop computer. 

•  USB to Ethernet Adapter
• Driver 

CD

•  Quick Setup Guide 

Note: The driver software must be installed before you connect the adapter. The 
adapter does not need to be connected for the software to install.

To install on a Windows PC:
1  Insert the driver CD into the optical drive on your computer. The 

software should run automatically. The initial installation screen opens. 

Note: If the software does not run automatically, locate and double-click 
Run.exe on the driver CD. 

2  Click on your operating system, then follow on-screen instructions. 

Note: If the computer has Windows 8, you do not need to install the driver from 
the disc. The drivers are installed automatically.

3  When the installation is complete, click Finish to restart your 

computer and finish the installation.

4  Connect the USB connector on the adapter to an open USB port on 

your desktop or laptop computer.

5  Connect a network cable to the Ethernet port on the adapter.

To install on a Mac:
1  Insert the driver CD into the optical drive of your computer. On the 

driver CD, locate and click AX88772.dmg.  Click the 

AX88772 

icon

(        ). The driver setup driver setup dialog box opens.

Quick Setup Guide  I  

NS-PU98505/NS-PU98505-C

Before using your new product, please read these instructions to prevent any damage.