Motorola SL4010 사용자 설명서
Advanced Features
English
39
Starting and Stopping Scan
Procedure:
Press the programmed Scan button to start or stop Scan.
OR
Follow the procedure below.
Press the programmed Scan button to start or stop Scan.
OR
Follow the procedure below.
1
c
to access the menu.
2
^
or
v
to Scan and press
c
to select.
3
^
or
v
to Scan State and press
c
to select.
4
^
or
v
to required scan state and press c to select.
5
The display shows Scan On when scan is enabled. The LED
blinks yellow and the scan icon appears.
OR
The display shows Scan Off when scan is disabled. The
LED turns off and the scan icon disappears.
blinks yellow and the scan icon appears.
OR
The display shows Scan Off when scan is disabled. The
LED turns off and the scan icon disappears.
While scanning, the radio will only accept data (e.g. text
message, location, or PC data) if received on its Selected
Channel.
message, location, or PC data) if received on its Selected
Channel.
Responding to a Transmission During a Scan
During scanning, your radio stops on a channel where activity
(e.g. a group call) targeted for the radio is detected. Your radio
unmutes and the incoming call sounds through the radio's
speaker.
(e.g. a group call) targeted for the radio is detected. Your radio
unmutes and the incoming call sounds through the radio's
speaker.
The radio remains on that channel while the activity is present
and for a programmed time period (known as "hang time") after
the activity ceases.
and for a programmed time period (known as "hang time") after
the activity ceases.
Procedure:
1
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
your mouth.
If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
2
Press the PTT button during hang time. The LED lights up
solid green.
solid green.
3
Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
speak clearly into the microphone.
4
Release the PTT button to listen.
5
If you do not respond within the hang time, the radio returns
to scanning other channels/groups.
to scanning other channels/groups.
Deleting a Nuisance Channel
If a particular channel continually generates unwanted calls or
noise (termed a “nuisance” channel), you can temporarily
remove the unwanted channel from the scan list.
noise (termed a “nuisance” channel), you can temporarily
remove the unwanted channel from the scan list.
This capability does not apply to the channel designated as the
Selected Channel.
Selected Channel.
EMEA-ANZ.book Page 39 Monday, March 19, 2012 2:32 PM