Motorola 326X V.34 사용자 설명서
Getting Started 3-11
G
e
tting St
arted
Sync Dialing from an IBM AS 400
The modem can be configured to operate as a synchronous originate modem
with the IBM AS 400. The AS 400 supports switched operation with call
origination via a V.25bis-compliant call establishment driver. In this type of
application, the modem is driven by the APPC/APPN bit-synchronous protocol.
with the IBM AS 400. The AS 400 supports switched operation with call
origination via a V.25bis-compliant call establishment driver. In this type of
application, the modem is driven by the APPC/APPN bit-synchronous protocol.
Where Do I Go from Here?
For more information on using the modem with an IBM AS 400, refer to:
• Chapter 4 for configuration instructions.
• Chapter 3, Automatic Calling Interfaces, in the 326X Series Modem
Reference Guide for details on bit-synchronous protocol frame formats and the
V.25bis protocol.
V.25bis protocol.
External Auto-Call Units
The modem can be used with applications that support external dialers, such as
the Bell 801C. Once an external dialer establishes a call, it passes control of the
dial line to the modem by the MI/MIC control leads on the DIAL LINE
connector. NOTE: This type of application is supported in Canada and the
U.S.A. only.
the Bell 801C. Once an external dialer establishes a call, it passes control of the
dial line to the modem by the MI/MIC control leads on the DIAL LINE
connector. NOTE: This type of application is supported in Canada and the
U.S.A. only.
Where Do I Go from Here?
For more information on external call units, refer to Chapter 3, Automatic
Calling Interfaces, in the 326X Series Modem Reference Guide.
Calling Interfaces, in the 326X Series Modem Reference Guide.
?
?