ZyXEL Communications 4528F 사용자 설명서
Chapter 48 Syslog
XGS-4526/4528F/4728F User’s Guide
426
48.2 Syslog Setup
Click Management > Syslog in the navigation panel to display this screen. The
syslog feature sends logs to an external syslog server. Use this screen to configure
the device’s system logging settings.
syslog feature sends logs to an external syslog server. Use this screen to configure
the device’s system logging settings.
Figure 232 Management > Syslog
The following table describes the labels in this screen.
Table 159 Management > Syslog
LABEL
DESCRIPTION
Syslog
Select Active to turn on syslog (system logging) and then configure
the syslog setting
the syslog setting
Logging Type
This column displays the names of the categories of logs that the
device can generate.
device can generate.
Active
Select this option to set the device to generate logs for the
corresponding category.
corresponding category.
Facility
The log facility allows you to send logs to different files in the syslog
server. Refer to the documentation of your syslog program for more
details.
server. Refer to the documentation of your syslog program for more
details.
Apply Click
Apply to save your changes to the Switch’s run-time memory.
The Switch loses these changes if it is turned off or loses power, so
use the Save link on the top navigation panel to save your changes to
the non-volatile memory when you are done configuring.
use the Save link on the top navigation panel to save your changes to
the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.