Multitech MT128ISA-SD 사용자 설명서
Introduction/Description
8-IWay Hopper
Your internal ISDN PC card is compatible with prevalent ISDN switch protocols.
It communicates using ISDN BRI (2B+D) service, which provides up to 128K bps
data communications.
This manual documents the following models:
This manual documents the following models:
MT128ISA-SD for ST interface no POTS port
MT128ISA-SV for ST interface with one POTS port
MT128ISA-UD for U interface no POTS port
MT128ISA-UV for U interface with with one POTS port
All of the current analog devices, including telephone set, G3 fax, answering ma-
chine, modem, and PBX trunk line, can be connected to the POTS port via an RJ-
11 jack in V models.
This owners manual will help you install, configure, and operate your TA.
This owners manual will help you install, configure, and operate your TA.
1.2
Features
Your internal ISDN PC card features include:
D Channel protocols. Including AT&T 5ESS, Nortel DMS-100, US NI-1 &
D Channel protocols. Including AT&T 5ESS, Nortel DMS-100, US NI-1 &
NI2, ETSI, Japan INS-64
B Channel protocols. Including HDLC, X.75, V.120, and voice (V models)
ISDN BRI (2B+D) and analog ports.
Supports Application Interfaces including WinISDN, CAPI 2.0, Windows
ISDN BRI (2B+D) and analog ports.
Supports Application Interfaces including WinISDN, CAPI 2.0, Windows
Comm (AT command/S-Registe/Result Codes) and NDISWAN Miniport.
Automatic detection of incoming calls as voice or data (V models).
Supports Windows 3.1, Windows 95 (OSR-2), and Windows NT Multilink PPP
Supports Windows 3.1, Windows 95 (OSR-2), and Windows NT Multilink PPP
connection.
Supports Microsoft ISDN Accelerator Pack.
PnP compatibility with 16 bits address decoding.
Ability to use the same communications software as analog modems
Provides On-line test and Diagnostics tools.
PnP compatibility with 16 bits address decoding.
Ability to use the same communications software as analog modems
Provides On-line test and Diagnostics tools.