Multi-Tech Systems MT2834ZPX 사용자 설명서
6
MT2834ZPX Owner's Manual
Fax Features
Your MT2834ZPX meets the CCITT V.17 standard for sending and
receiving faxes. When linked to a compatible fax machine or modem,
it can transmit faxes at 14.4 K bps. It also meets the CCITT’s Group 3
Designation for sending and receiving faxes at 9600 bps; and Group 2
Designation for sending and receiving faxes at 4800 bps. The
MT2834ZPX is also downward-compatible with modems to speeds as
low as 300 bps, so it can send and receive faxes with any fax machine
in the world.
receiving faxes. When linked to a compatible fax machine or modem,
it can transmit faxes at 14.4 K bps. It also meets the CCITT’s Group 3
Designation for sending and receiving faxes at 9600 bps; and Group 2
Designation for sending and receiving faxes at 4800 bps. The
MT2834ZPX is also downward-compatible with modems to speeds as
low as 300 bps, so it can send and receive faxes with any fax machine
in the world.
Product Description
The MT2834ZPX is a internal half-length fax/modem card for IBM
Personal Computers (PC, XT, AT Pentium or compatible units); and
fits into a full- or half-size expansion slot. The MT2834ZPX provides
dial-up asynchronous communication capability with other personal
computers, terminals, on-line computer services or other types of
computer systems. Connection to the phone line is made possible by
an RJ11 modular type connector. The MT2834ZPX can be configured
as either a COM1, COM2, COM3, or COM4 communication port; with
a selection of 5 IRQ values. Selection of a specific COM port/IRQ
value is accomplished by choosing the proper berg jumpers located on
the MT2834ZPX's circuit board. Hardware configuration and
installation procedures are described in Chapter 2.
Personal Computers (PC, XT, AT Pentium or compatible units); and
fits into a full- or half-size expansion slot. The MT2834ZPX provides
dial-up asynchronous communication capability with other personal
computers, terminals, on-line computer services or other types of
computer systems. Connection to the phone line is made possible by
an RJ11 modular type connector. The MT2834ZPX can be configured
as either a COM1, COM2, COM3, or COM4 communication port; with
a selection of 5 IRQ values. Selection of a specific COM port/IRQ
value is accomplished by choosing the proper berg jumpers located on
the MT2834ZPX's circuit board. Hardware configuration and
installation procedures are described in Chapter 2.