Acer 08P4100 사용자 설명서

Installing the Mylex Disk Array Controller as the Primary NetWare 5.0 Controller

2-10

PCI Disk Array Controller Drivers Manual

NetWare scans for controllers that do not have drivers already loaded.

6. At the “Select a driver” box, press <Ins> to choose to install an 

unlisted driver.

7. Insert the NT4/NW Drivers Software Kit diskette into the diskette 

drive.

8. Press <F3> to specify the path of the NetWare driver you’re about to 

install.

9. Change the path line to read:

and press <Enter>. NetWare scans for drivers on the floppy diskette in 
the specified path.

10. In the “Select a driver to install” box, select the appropriate driver for 

your controller:

MDAC.HAM | Mylex Disk Array Controller <model number>

11. Select Yes at the confirmation box to install the driver.

12. Press <Enter> to select the default server boot path.

13. Select No to save a backup of the old or existing driver. 

14. Select No to decline selection of an additional driver to install unless 

you are installing more than one controller at this time.

15. Exit INSTALL.NLM by pressing <Esc> three times, then selecting 

Yes at the “Exit Install?” box.

This concludes installation of the driver files needed to run your Mylex Disk 
Array Controller under NetWare 5.0.