Acer 08P4100 사용자 설명서
Installing the Mylex Disk Array Controller into an Existing Windows NT 4.0 System
3-12
PCI Disk Array Controller Drivers Manual
19. If there is an existing Mylex driver in the system you will see the box
shown below in Figure 3-16. Click New to install the new driver from
the diskette.
the diskette.
Figure 3-16. Install the Accelerated Driver from Diskette
20. Again, be sure the path is A:\DISK as shown in Figure 3-17 and click
Continue.
Figure 3-17. Confirm Diskette Accelerated Driver Path
The driver is copied from the diskette. The System Settings Change
box is displayed as shown in Figure 3-18.
box is displayed as shown in Figure 3-18.
Figure 3-18. Driver Installation Complete - Restart
21. Remove the diskette and click Yes to restart Windows NT 4.0 for the
new Mylex Disk Array Controller drivers to be available.