Actiontec electronic HPE400T 사용자 설명서
10
Actiontec MegaPlug 4-Port Hub User Manual
11
Chapter 3 Using the Configuration Utility
Local Device(s) on Your Computer
The list displays all MegaPlug Hubs connected to the computer.
☞
Note: If no Hub appears in the Device List, make sure the Hub
is connected properly (with the appropriate Ethernet cable) to
the computer. Then, unplug the Hub, and plug it back in again.
If, after performing these actions, no Hub appears in the Device
List, the Hub may be defective. Contact technical support.
is connected properly (with the appropriate Ethernet cable) to
the computer. Then, unplug the Hub, and plug it back in again.
If, after performing these actions, no Hub appears in the Device
List, the Hub may be defective. Contact technical support.
MegaPlug Encryption Key
Enter an encryption key in this text box to provide security for your MegaPlug
network. A key is similar to a password, and can be made up of any combination
of letters or numbers, from 4 to 24 characters long. Once activated, this key must
be entered into a device’s network configuration to join the MegaPlug network.
network. A key is similar to a password, and can be made up of any combination
of letters or numbers, from 4 to 24 characters long. Once activated, this key must
be entered into a device’s network configuration to join the MegaPlug network.
P
Important: All Hubs on the same network must have the
same encryption key. If not, they will not be able to connect.
same encryption key. If not, they will not be able to connect.
Set Local Device Only
Click this button to encrypt the device selected in the “Local Device(s) on your
computer” list box.
computer” list box.
Advanced
Selecting Advanced from the row of tabs near the top of the Utility’s window gen-
erates the “Advanced” tab.
erates the “Advanced” tab.