AirLink Version 2.40 사용자 설명서

The SIM (Subscriber Identity Module) card in the Raven-E is a smartcard securely storing the key 
identifying a mobile subscriber. Generally, you will only need to install the SIM once in the life of 
the modem and it may be pre-installed by AirLink. 

Installing the SIM 

To install the SIM, you will only need a small phillips head screw driver. 

a. Unplug the Raven-E’s power and all cables. 

b. Using a small phillips head screw driver, remove the screws on the back of the Raven-E.  

c. Slide the casing off of the Raven-E and set it aside. 

For additional modem configuration options, please refer to the Raven-E iDEN 
Users Guide for TELUS. 

If the SIM card was pre-installed by AirLink, there is  nothing more you 

need to do. Skip to the Hardware section and/or to the DUN instructions, if you 
need Dial-Up Networking.