Cisco Systems 1000 Series 사용자 설명서
5-51
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 5 Software Upgrade Processes Supported by Cisco ASR 1000 Series Routers
ISSU Upgrade for Redundant Platforms
Step 12
request platform software package install rp
active-RP
file
URL-to-active-file-system
:asr1000rp2-{elcbase,elc
spa}*
version
*.pkg slot
ELC-slot-number
force
Example:
Router# request platform software package
install rp 0 file
bootflash:asr1000rp2-{elcbase,elcspa}*03.13.00.
S.154-3.S-ext*.pkg slot 4 force
Upgrades the ELC and SPA subpackages for each ELC on
the router.
the router.
Note
This step must be completed for one ELC at a time,
and repeated for each ELC installed on the router
before performing the next step.
and repeated for each ELC installed on the router
before performing the next step.
Tip
You can use the show ip interface brief command
to identify which slots contain ELCs and SPAs. The
interfaces with three numbers (in the form
ELC-number/SPA-number/interface-number)
identify the ELC and SPA locations in the router.
to identify which slots contain ELCs and SPAs. The
interfaces with three numbers (in the form
ELC-number/SPA-number/interface-number)
identify the ELC and SPA locations in the router.
Note
The pattern options used in this CLI (elcbase and
elcspa) were introduced in Cisco IOS XE Release
3.10S and are not available in previous Cisco IOS
XE Releases.
elcspa) were introduced in Cisco IOS XE Release
3.10S and are not available in previous Cisco IOS
XE Releases.
Step 13
request platform software package install rp
active-RP
file
URL-to-active-file-system
:asr1000rp2-esp*
version
*.
pkg slot
standby-ESP-slot
request platform software package install rp
active-RP
file
URL-to-active-file-system
:asr1000rp2-esp*
version
*.
pkg slot
active-ESP-slot
Example:
Router# request platform software package
install rp 0 file
bootflash:asr1000rp2-esp*03.13.00.S.154-3.S-ext
*.pkg slot 1
Router# request platform software package
install rp 0 file
bootflash:asr1000rp2-esp*03.13.00.S.154-3.S-ext
*.pkg slot 0
Upgrades the ESP Base subpackage on the standby and the
active ESPs.
active ESPs.
After entering the issu loadversion rp command on the
active RP, the ESP switchover will occur automatically.
Minimal traffic interruption will occur as a result of this
switchover.
active RP, the ESP switchover will occur automatically.
Minimal traffic interruption will occur as a result of this
switchover.
Step 14
request platform software package install rp
active-RP
file
URL-to-active-file-system
:asr1000rp*
version
*.pkg
force
Example:
Router# request platform software package
install rp 0 file
bootflash:asr1000rp2*03.13.00.S.154-3.S-ext*.pk
g force
Upgrades all of the sub-packages on the active RP.
Note
This step is required to ensure that all subpackages
on the router were upgraded as part of this
procedure, and might upgrade some subpackages
that would otherwise be missed in the process.
on the router were upgraded as part of this
procedure, and might upgrade some subpackages
that would otherwise be missed in the process.
Step 15
show version
active-RP
provisioned
show version
active-RP
installed
Example:
Router# show version r0 provisioned
Router# show version r0 installed
(Optional) Confirms the subpackages are provisioned and
installed.
installed.
Command or Action
Purpose