Linksys WAP54GP 사용자 설명서

10

Chapter 5: Configuring the Wireless-G Access Point with 

Power Over Ethernet

The Utility can be accessed via Microsoft Internet Explorer or Netscape Navigator through use of a computer that 
is networked with the Access Point.

For a basic network setup, most users only have to use the following screens of the Utility:

•

Setup
On the Setup screen, enter your basic network settings here.

•

Management
Click the Administration tab and then select the Management screen. The Access Point’s default password 
is admin. To secure the Access Point, change the AP Password from its default.

There are five main tabs: Setup, Wireless, AP Mode, Administration, and Status. Additional screens will be 
available from most of the main tabs.

Setup

Enter the settings for the Access Point and your Internet connection on this screen.

Wireless

You will use the Wireless tabs to enter a variety of wireless settings for the Access Point.

•

Basic Wireless Settings. Enter the network mode, Virtual Local Area Network (VLAN) settings, SSIDs, and 
other settings on this screen.

•

Wireless Security. Use this screen to configure the Access Point’s security settings.

•

Wireless Network Access. From this screen, you can permit or block access to your wireless network.

HAVE YOU: Enabled TCP/IP on your PCs? PCs 
communicate over the network with this 
protocol. Refer to “Appendix D: Windows Help” 
for more information on TCP/IP.