Lancom Systems 3550 사용자 설명서

LANCOM 3550 Wireless

31

If you run the LANCOM Router via DSL access with a flat-rate tariff, you can
set the maximum connecting-time in minutes.

Any budget can be deactivated by entering the value '0.'



In basic settings the charge protection is defined to maximum 600
minutes within seven days. Adapt this setting to your personal needs
or deactivate the charge protection if you have arranged a flatrate
with your provider.

햲

Start up LANconfig by clicking Start 

  Programs 

  LANCOM 

LANconfig automatically detects the new LANCOM Router in the TCP/IP
network. Then the setup wizard starts that will help you make the basic
settings of the device or will even do all the work for you (provided a suit-
able network environment exists).



If the setup wizard does not start automatically, start a manual search
for new devices on all ports (if the LANCOM Router is connected via a
serial port) or in the network (Device 

 Find).



If you cannot access an unconfigured LANCOM Router, the problem
may be due to the netmask of the LAN: with less than 254 possible
hosts (netmask > '255.255.255.0'), please ensure that the IP address
'x.x.x.254' is located in your own subnet. 

If you have chosen automatic TCP/IP configuration, please continue with
Step 

햵

.

햳

If you would like to configure the TCP/IP settings manually, assign an
available address from a suitable address range to the LANCOM Router.
Confirm your choice with Next.