Motorola im240 사용자 설명서

Note: The areas with potentially explosive atmospheres referred to 

above include fueling areas such as below decks on boats, 
fuel or chemical transfer or storage facilities, areas where the 
air contains chemicals or particles, such as grain, dust or 
metal powders, and any other area where you would 
normally be advised to turn off your vehicle engine. Areas 
with potentially explosive atmospheres are often but not 
always posted.

To avoid possible interference with blasting operations, turn off your 
modem product when you are near electrical blasting caps, or in a 
blasting area. Obey all signs and instructions.

This product is not water proof, and exposing the unit to liquids may 
result in permanent damage to the unit.

If your modem product interior gets wet, then do not try to accelerate 
drying with the use of an oven or a dryer as this will damage the modem 
product and void the warranty. Instead, do the following:

Immediately power off the modem product.

2  Remove SIM card (if so equipped) from modem product.

3  Shake excess liquid from modem product.

4  Place the modem product in an area that is at room temperature 

and has good air flow.

5  Let the modem product and SIM card dry for 72 hours before 

powering on the modem product.

If the modem product does not work after following the steps listed 
above, contact your dealer for servicing information.

Clean the external surfaces of the modem product with a damp cloth, 
using a mild solution of dishwashing detergent and water. Some 
household cleaners may contain chemicals that could seriously 
damage the modem product. Avoid the use of any petroleum-based 
solvent cleaners. Also, avoid applying liquids directly on the modem 
product.