Motorola 3342 사용자 설명서

Displays the names of the current shell and PPP users. 

segment | end-to-end ]

Lets you check the ATM connection reachability and network connectivity. This command sends five Opera-
tions, Administration, and Maintenance (OAM) loopback calls to the specified vpi/vci destination. There is a 
five second total timeout inter val.

Use the segment argument to ping a neighbor switch.
Use the end-to-end argument to ping a remote end node.

vcc-id ]

Releases the DHCP lease the Motorola Netopia® Gateway is currently using to acquire the IP settings for 
the specified DSL por t. The 

 identifier is an “index” letter in the range B-I, and does not directly 

map to the VCC in use. Enter the 

 command without the variable to 

see the letter assigned to each vir tual circuit.

vcc-id ]

Releases the DHCP lease the Motorola Netopia® Gateway is currently using to acquire the IP settings for 
the specified DSL por t. The 

 identifier is an “index” letter in the range B-I, and does not directly 

map to the VCC in use. Enter the 

 without the variable to see the letter 

assigned to each vir tual circuit.

Resets any open DSL connection.

Resets the point-to-point connection over the specified vir tual circuit. This command only applies to vir tual 
circuits that use PPP framing.

Displays ATM statistics for the Motorola Netopia® Gateway. The optional all argument displays a more 
detailed set of ATM statistics.

Displays DSL por t statistics, such as upstream and downstream connection rates and noise levels.