Motorola 3342 사용자 설명서

You can use the 

command to display the current CONFIG settings for your Motorola Netopia® Gate-

way. If you enter the 

command at the top level of the CONFIG hierarchy, the CLI displays the settings 

for all enabled functions. If you enter the 

 command at an intermediate node, you see settings for that 

node and its subnodes.

The Motorola Netopia® Gateway command line inter face includes a step mode to automate the process of 
entering configuration settings. When you use the CONFIG step mode, the command line inter face prompts 
you for all required and optional information. You can then enter the configuration values appropriate for 
your site without having to enter complete CLI commands.

When you are in step mode, the command line inter face prompts you to enter required and optional set-
tings. If a setting has a default value or a current setting, the command line inter face displays the default 
value for the command in parentheses. If a command has a limited number of acceptable values, those val-
ues are presented in brackets, with each value separated by a ver tical line. For example, the following CLI 
step command indicates that the default value is 

 and that valid entries are limited to 

 and 

.

option (off) [on | off]: 

on

You can accept the default value for a field by pressing the Return key. To use a different value, enter it and 
press Return.

You can enter the CONFIG step mode by entering 

 from the top node of the CONFIG hierarchy. You can 

enter step mode for a par ticular ser vice by entering 

 In stepping set mode (press 

Control-X <Return/Enter> to exit. For example:

Netopia-3000/9437188 (top)>> 

...
system
   name (“Netopia-3000/9437188”): 

   Diagnostic Level (High): 

Stepping mode ended.

You can use the 

 CONFIG command to make sure that your configuration settings have been 

entered correctly. If you use the 

 command, the Motorola Netopia® Gateway verifies that all 

required settings for all ser vices are present and that settings are consistent.

Netopia-3000/9437188 (top)>> 

Error: Subnet mask is incorrect
Global Validation did not pass inspection!

You can use the 

 command to verify your configuration settings at any time. Your Motorola Neto-

pia® Gateway automatically validates your configuration any time you save a modified configuration.