Motorola AP-51XX 사용자 설명서

5-9

frame arrives on the access point, it queries the VMPS for the VLAN assignment based on 
the source MAC address of the arriving frame.

If statically mapping VLANs, leave the 

 checkbox specific to the target WLAN and 

its intended VLAN unselected. The administrator is then required to configure VLAN 
memberships manually.

The Dynamic checkbox is enabled only when a WLAN is having EAP configured. Otherwise, 
the checkbox is disabled.

12. Use the 

drop-down menu to select the name of the target VLAN to map to the WLAN 

listed on the left-hand side of the screen.

Motorola recommends mapping VLANs strategically in order to keep VLANs tied to the 
discipline they most closely match. For example, If WLAN1 is comprised of MUs supporting 
the sales area, then WLAN1 should be mapped to sales if a sales VLAN has been already 
been created.

13. Click 

to return to the 

 screen. Click 

 to return to the LAN screen. Once 

at the LAN screen, click 

 to re-apply your changes.

Both LAN1 and LAN2 have separate sub-screens to configure the DHCP settings used by the LAN1 
and LAN2 interfaces. Within each LAN screen is a button to access a sub-screen to configure 
advanced DHCP settings for that LAN. For more information, see 

. Additionally, LAN1 and LAN2 each have separate 

submenu items 

used to prevent specific (an potentially unneccesary) frames from being processed, for more 
information, see 

.

To configure unique settings for either LAN1 or LAN2:

1.

Select 

 -> 

-> 

from the access point menu 

tree.