Motorola AP-51XX 사용자 설명서

5-63

8.

Use the 

drop-down menu to select a WLAN from those WLANs sharing the 

same BSSID. The selected WLAN is the primary WLAN for the specified BSSID. 

9.

Click 

to save any changes to the Radio Settings and Advanced Settings screens. 

Navigating away from the screen without clicking Apply results in changes to the screens 
being lost.

10. Click 

(if necessary) to undo any changes made to the screen and its sub-

screens. Undo Changes reverts the settings to the last saved configuration.

11. Click

to securely exit the Access Point applet. A prompt displays confirming the 

logout before the applet is closed.

The access point can be configured to grant individual WLAN’s network bandwidth priority levels. Use 
the 

screen to control the network bandwidth allotted to individual 

WLANs. Define a weighted scheme as needed when WLAN traffic supporting a specific network 
segment becomes critical. Bandwidth management is configured on a per-WLAN basis. However, 
with this latest version 2.0 release of access point firmware, a separate tab has been created for each 
access point radio. With this new segregated radio approach, bandwidth management can be 
configured uniquely for individual WLANs on different access point radios.

Lists the WLAN names available to the 802.11a or 802.11b/g radio 
that can be assigned to a BSSID.

Assign a BSSID value of 1 through 4 to a WLAN in order to map the 
WLAN to a specific BSSID.

A read only field displaying the downgraded BC/MC (Broadcast/
Multicast) cipher for a WLAN based on the BSSID and VLAN ID to 
which it has been mapped.

Displays the following color coded status:

Red

 - Error (Invalid Configuration)

Yellow

 - Warning (Broadcast Downgrade)

Green

 - Good (Configuration is OK)

Displays the verbal status of the WLAN and BSSID assignments. If 
the Status column displays green, the Message will typically be 

. If yellow, a description of invalid 

configuration displays.