Motorola AP-51XX 사용자 설명서

2-17

For standard 48-Volt Power Adapter (Part No. 50-14000-243R) and line cord installations:

a. Connect RJ-45 Ethernet cable between the network data supply (host) and the AP-5131 

LAN port.

b. Verify the power adapter is correctly rated according the country of operation.

c. Connect the power supply line cord to the power adapter.

d. Attach the power adapter cable into the power connector on the AP-5131.

e. Plug the power adapter into an outlet.

9.

Verify the behavior of the AP-5131 LEDs. For more information, see 

The AP-5131 is ready to configure. For information on an AP-5131 default configuration, see 

. For specific details on AP-5131 system configurations, see 

.

A suspended ceiling mount requires holding the AP-5131 up against the T-bar of a suspended ceiling 
grid and twisting the AP-5131 chassis onto the T-bar.

The mounting hardware and tools (customer provided) required to install the AP-5131 on a ceiling 
T-bar consists of:

•

Safety wire (recommended) 

•

Security cable (optional)

To install the AP-5131 on a ceiling T-bar:

1.

If required, loop a safety wire —with a diameter of at least 1.01 mm (.04 in.), but no more 
than 0.158 mm (.0625 in.) —through the tie post (above the AP-5131’s console connector) 
and secure the loop.

2.

If required, install and attach a security cable to the AP-5131 lock port.

3.

Attach the radio antennae to their correct connectors. 

If the AP-5131 is utilizing remote management antennae, a wire cover 
can be used to provide a clean finished look to the installation. Contact 
Motorola for more information.