Motorola AP-51XX 사용자 설명서

10-7

To review a sample AAP configuration, see 

.

In the event of a switch failure, an AAP's independent WLAN continues to operate without disruption. 
The AAP attempts to connect to other switches (if available) in background. Extended WLANs are 
disabled once switch adoption is lost. When a new switch is discovered and a connection is secured, 
an extended WLAN can be enabled.

If a new switch is located, the AAP synchronizes its configuration with the located switch once 
adopted. If Remote Site Survivability (RSS) is disabled, the independent WLAN is also disabled in the 
event of a switch failure.

RSS can be used to turn off RF activity on an AAP if it loses adoption (connection) to the switch.  

An AAP can extend an AP51x1's existing mesh functionality to a switch managed network. All mesh 
APs are configured and managed through the wireless switch. APs without a wired connection form 
a mesh backhaul to a repeater or a wired mesh node and then get adopted to the switch. Mesh nodes 
with existing wired access get adopted to the switch like a wired AAP.

Mesh AAPs apply configuration changes 300 seconds after the last received switch configuration 
message. When the configuration is applied on the Mesh AAP, the radios shutdown and re-initialize 
(this process takes less than 2 seconds), forcing associated MUs to be deauthenticated and the Mesh 
link will go down. MUs are able to quickly associate, but the Mesh link will need to be re-established 

RSS Enabled

WLAN continues beaconing 

WLAN continues beaconing but AP does allow 

clients to associate on that WLAN 

RSS Disabled

WLAN stops beaconing

WLAN stops beaconing 

For a dependant AAP, independent WLANs continue to beacon for three 
days in the absence of a switch.