Motorola AP-51XX 사용자 설명서

B-4

• Obtains and applies the expected IP Address from the DHCP Server

• Downloads both the firmware and configuration files from the TFTP Server and updates 

both as needed. Verify the file versions within the 

 screen. 

The following are instructions for automatic firmware and configuration file updates via DHCP using 
extended options or standard options configured globally. 

The setup example described in this section includes:

•

1 AP-5131 or AP-5181 model access point

•

1 Microsoft Windows DHCP Server

•

1 TFTP Server.

To configure Global options using extended/standard options:

1.

Set the Windows DHCP Server and access point on the same Ethernet segment.

2.

Configure the Windows based DHCP Server as follows:

a. Highlight the Server Domain Name (for example, apfw.motorola.com). From the 

 

menu, select 

b. Add the following 3 new options under 

 class:

If the firmware files are the same, the firmware will not get updated. If 
the configuration file name matches the last used configuration file on the 
access point or if the configuration file versions are the same, the access 
point configuration will not get updated.

Access point TFTP Server IP Address
(Note: Use any one option)

181
186

IP address
String

Access point Firmware File Name

187

String

Access point Config File Name
(Note: Use any one option)

129
188

String
String

Access point TFTP Server IP Address 

66 

String