Motorola AP-51XX 사용자 설명서

4-6

7.

Click 

to securely exit the access point Access Point applet. A prompt displays 

confirming the logout before the applet is closed.

An access point needs settings defined to discover (and adopt) an available switch and establish a 
connection and data tunnel. It’s through this switch adoption that the access point receives its 
adaptive AP (AAP) configuration. With the 2.0 access point firmware release, a new screen has been 
added to define the mechanisms used to adopt a switch and route AAP configuration information

.

To configure the access point’s switch discovery method and connection medium:

1.

Select 

 -> 

from the menu tree.

For an AAP overview and a theoretical discussion of how an access point 
discovers a switch to creates a secure data tunnel for adaptive AP 
operation, see 

AAP functionality is only supported on a Motorola WS5100 model switch 
(running firmware version 3.1) or higher and a Motorola RFS7000 model 
switch (running firmware version 1.1 or higher). 

The Adaptive AP Setup screen does not display the AAP’s adoption status 
or adopted switch. This information is available using the access point’s 
CLI. To review AAP adoption status and adopted switch information, see 

.