Netgear WNDR37AV-100NAS 전단

© 2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered 

trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names 

are trademarks or registered trademarks of their respective holders. Information is subject to change without 

notice. 

1.  In the address field of your browser, type http://www.routerlogin.net and 

click Enter. 

2.  Enter the router User Name admin and 

default Password password to open 
your router’s main settings page. 

3.  When the main settings page opens, you 

will be asked if you want to “Check for 
Update.” Click Cancel. You can always 
check for new firmware later after you are 
connected to the Internet. 

4.  Select the first menu item on the left: Setup Wizard. Make sure Yes is 

selected. Then click Next and follow the prompts to complete the Setup Wizard.

When the Setup Wizard has completed detecting your connection, the Basic 
Settings page displays showing your settings. You are now connected to the 
Internet.

Note: If your ISP requires that you enter a User Name or Password, you will be 
prompted to enter this information. If you do not have this information, contact 
your ISP. 

After connecting to the Internet, you can check for firmware updates by selecting 
Router Upgrade and following the on-screen prompts.

You should set up a secure wireless network. Once your router security is established, 
your wireless laptops, gaming devices (such as Wii or Play station 3 with wireless), 
or other wireless equipment can safely and securely connect to the Internet.

1.  From the main menu page, select Wireless Settings.* 

2.  First, name your wireless network. Choose a name that is easy for you to 

remember. You might want to write it down here: ___________________________ 
(the default name is NETGEAR).

3.  Select your security method. NETGEAR recommends WPA-PSK (TKIP) +WPA2-

PSK (AES). Then, enter a Passphrase. In the example, we entered HomeNetwork. 
You might want to write your Passphrase down here:________________________.

Note: Both your Network Name (SSID) and Passphrase are case sensitive. Your 
Network name, Security method and Passphrase must be the same on all the 
wireless devices connected to your router.

4.  Click Apply and close your browser.

*Your router menu may display different or additional features not shown in this image.

 

Enter your wireless information here:
 Wireless Network Name (SSID) ________________________________
 Wireless Security Passphrase __________________________________
 If you don’t remember your Passphrase, type http://www.routerlogin.net into 
 your browser and log in by entering your User Name admin and Password 
 (default is password). Then, select Wireless Settings to retrieve your 
 Passphrase.

You can add wireless computers and other equipment to your wireless network: 

1.  Open the wireless software that manages your wireless connections on the 

wireless device (iPhone, laptop computer, gaming device) that you want to 
connect to your router. 

2.  The wireless software will scan for all wireless networks in your area. Look for 

your network—the one you named when you set up your router. Select it.

3.  If you set up security, you will be prompted for a Passphrase or network key. Enter 

the Passphrase you selected and click Connect. 

If your wireless device supports WPS (WiFi Protected Setup)—NETGEAR calls this 
method Push 'N' Connect—you might be prompted to press a WPS button on the 
router instead of entering a Passphrase. Then:

1.  Press the WPS button on the router. It will look similar to 

 or 

.

2.  Within 2 minutes, follow the wireless software instructions on the wireless device 

to complete the WPS process. 

The device will then be connected to your router. Repeat this process to add other 
wireless devices.

For complete DoC please visit the NETGEAR EU Declarations of Conformity website 
at: 

.