Netopia 2200 사용자 설명서
82
10.
Select the
Save and Restart
link to complete the entire Pinhole creation
task and ensure that the parameters are properly saved.
☛
NOTE:
REMEMBER: When you have re-assigned the por t address for the embedded
Web ser ver, you can still access this facility.
Use the Gateway’s WAN address plus the new por t number.
In this example it would be
<WAN Gateway address>:<new por t number> or, in this case,
210.219.41.20:8100
Web ser ver, you can still access this facility.
Use the Gateway’s WAN address plus the new por t number.
In this example it would be
<WAN Gateway address>:<new por t number> or, in this case,
210.219.41.20:8100
You can also use the LAN-side address of the Gateway, 192.168.1.x:8100 to
access the web and 192.168.1.x:23 to access the telnet ser ver.
access the web and 192.168.1.x:23 to access the telnet ser ver.
Link:
IPMaps
IPMaps suppor ts one-to-one Network Address Translation (NAT) for IP addresses assigned
to ser vers, hosts, or specific computers on the LAN side of the Netopia Gateway.
to ser vers, hosts, or specific computers on the LAN side of the Netopia Gateway.
A single static or dynamic (DHCP) WAN IP address must be assigned to suppor t other
devices on the LAN. These devices utilize Netopia’s default NAT/PAT capabilities.
devices on the LAN. These devices utilize Netopia’s default NAT/PAT capabilities.