Netgear WNR200v4 사용자 설명서

Select the Turn Remote Management On check box.

Under Allow Remote Access By, specify the external IP addresses to be allowed to access 

the router’s remote management.

For enhanced security, restrict access to as few external IP addresses 
as practical.

To allow access from a single IP address on the Internet, select the Only This 
Computer radio button. Enter the IP address that is allowed access. 

To allow access from a range of IP addresses on the Internet, select the IP Address 
Range radio button. Enter a beginning and ending IP address to define the allowed 
range.

To allow access from any IP address on the Internet, select the Everyone radio 
button.

Specify the port number for accessing the router user interface.

Normal web browser access uses the standard HTTP service port 80. For greater 
security, enter a custom port number for the remote router user interface. Choose a 
number between 1024 and 65535, but do not use the number of any common service 
port. The default is 8080, which is a common alternate for HTTP.

Click the Apply button.

When you access your router from the Internet, type your router’s WAN IP address in your 
browser’s address or location field followed by a colon (:) and the custom port number. For 
example, if your external address is 203.0.113.123 and you use port number 8080, enter 
http://203.0.113.123:8080 in your browser. 

Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, 
to access the network and connect to other devices as needed. UPnP devices can 
automatically discover the services from other registered UPnP devices on the network.

If you use applications such as multiplayer gaming, peer-to-peer 
connections, or real-time communications such as instant messaging 
or remote assistance, you should enable UPnP.



Select Advanced > Advanced Setup > UPnP.