Netgear WNR200v4 사용자 설명서



Select the Advanced tab.

The Router Status screen displays. The Router Information pane is located in the upper left 
of the screen.

The following settings are displayed:

Hardware Version. The router model.

Firmware Version. The version of the router firmware. It changes if you upgrade the router 
firmware.

GUI Language Version. The localized language of the router user interface.

Operation Mode. The mode in which the router operates:

Router. The router functions in default mode.

AP. The router functions as an access point only.

LAN Port.

MAC Address. The Media Access Control address for the LAN port. This is the unique 
physical address being used by the Ethernet (LAN) port of the router. 

IP Address. The IP address that is used by the Ethernet (LAN) port of the router. The 
default is 192.168.1.1.

DHCP Server. Identifies whether the router’s built-in DHCP server is active for the 
LAN-attached devices.



Select the Advanced tab.

The Router Status screen displays. The Internet Port pane is located in the upper right of the 
screen.

The following settings are displayed:

MAC Address. The Media Access Control (MAC) address for the Internet port. This is the 
unique physical address being used by the Internet (WAN) port of the router.

IP Address. The IP address that is used by the Internet (WAN) port of the router. If no 
address is shown or the address is 0.0.0, the router is not connected to the Internet.

Connection. Shows whether the router is using a fixed or dynamic IP address on the Internet 
port. If the value is DHCP, the router obtains an IP address dynamically from the ISP or from 
a DHCP server on your LAN.