Netgear WNR200v4 사용자 설명서
Troubleshooting
131
N300 Wireless Router WNR2000v4
If your computer obtains its information from the router by DHCP, reboot the computer,
and verify the gateway address.
and verify the gateway address.
•
You might be running login software that is no longer needed.
If your ISP provided a program to log you in to the Internet (such as WinPoET), you no
longer need to run that software after installing your router. If you use Internet Explorer as
your browser, you might need to select Tools > Internet Options, click the Connections
tab, and select Never dial a connection. Other browsers have similar options.
longer need to run that software after installing your router. If you use Internet Explorer as
your browser, you might need to select Tools > Internet Options, click the Connections
tab, and select Never dial a connection. Other browsers have similar options.
Troubleshoot a PPPoE Internet Connection
To troubleshoot a PPPoE Internet connection:
1.
Start your browser, and select an external site such as
.
2.
Access the router user interface at
http://www.routerlogin.net
.
3.
Select the Advanced tab.
The Router Status screen displays.
4.
On the Internet Port pane, click the Connection Status button.
122. If the fields show valid
information, including valid IP addresses, your PPPoE connection is up and working.
If any of the fields show incomplete information, or no valid IP address, you can attempt
to reconnect by clicking the Connect button. The router continues to attempt to connect
indefinitely.
to reconnect by clicking the Connect button. The router continues to attempt to connect
indefinitely.
If you cannot connect after several minutes, you might be using an incorrect service name,
user name, or password. There might also be a provisioning problem with your ISP.
user name, or password. There might also be a provisioning problem with your ISP.
Note:
Unless you connect manually, the router does not authenticate using
PPPoE until data is transmitted to the network.
PPPoE until data is transmitted to the network.
Changes Not Saved
If the router does not save the changes you make through the NETGEAR genie screens,
check the following:
check the following:
•
When you enter configuration settings on a screen, always click the Apply button before
you move to another screen or tab, or your changes are lost.
you move to another screen or tab, or your changes are lost.
•
Click the Refresh or Reload button in the web browser. The changes might have
occurred, but the old settings might be in the web browser’s cache.
occurred, but the old settings might be in the web browser’s cache.