Netgear WNR200v4 사용자 설명서

The security option needs to be WEP (or no security). The WEP option displays only if 
you select Up to 54 Mbps from the Mode menu on the Wireless Settings screen (see 

27).

The wireless repeating function works only in hub and spoke mode. The units cannot be 
daisy-chained. You need to know the wireless MAC addresses of all units. First, set up the 
base station, and then set up the repeater.



Select Advanced > Advanced Setup > Wireless Repeating Function. 

The Wireless Repeating Function screen displays. The wireless MAC address of the 
router is displayed onscreen.

Select the Enable Wireless Repeating Function check box. 

Select the Wireless Base Station radio button.

(Optional) Select the Disable Wireless Client Association check box to prevent wireless 

clients from associating with the base station and allowing LAN client associations only. You 

can leave the check box cleared if you prefer wireless clients to be able to associate with the 

base stations.

In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access 

points that should function as repeaters. 

If your router is the base station, it can function as the “parent” for up to 4 other access 
points.