MicroNet Technology SP5052 사용자 설명서

-dspcore

update DSP kernel code(optional)

-dspapp

update DSP application code(optional)

-rbpcm

update RingBack Tone PCM file(optional)

-htpcm

update Hold Tone PCM file(optional)

-greeting

update

Greetings

PCM

file(optional)

-askpin

update

AskPin

file(optional)

-s

IP address of TFTP/FTP server (mandatory)

-f

file

name(mandatory)

-method

download via TFTP/FTP (TFTP: mode=0, FTP: mode=1)

-ftp

specify username and password for FTP

Note:

This command can run select one option in 'app', 'dsptest', 'dspcore',

'dspapp', and 'rbpcm'.

Example:

rom -method 1

rom -ftp vwusr vwusr

rom -app -s 192.168.4.101 -f app.bin

Parameter Usages:
-print

show versions of all rom files

-app, boot, dsptest, dspcore, dspapp

to update main Application program

code, Boot code, DSP testing code, DSP kernel code, or DSP
application code.

-boot2m

boot2m parameter let users to upgrade the whole system flash,
including all the firmware that mentioned above. If 2M rom file
update is executed,

users have to set again the MAC address

of VoIP FXO gateway or it will cause conflict on Ethernet
because the original MAC address is erased during 2M
ROM file upgrading.

Note:
To set MAC address please key in command setmac:(when key in MAC
address ,press enter each time after key in two characters):

usr/config$ setmac

- enter mac address
00
01
a8
00
0x
xx
- the mac address is 00 01 a8 00 0x xx
- if mac address is correct, please press 'y' to

setup configuration, else press 'n' to continue

-greeting

The greeting file can be updated by users. The attributes of
sound file should complied to: μ-law, 8000 Hz , 8 bit, Mono, 7
kb/s

-askpin

update ASKPIN sound file. This is the greeting sound that when