MicroNet Technology SP5052 사용자 설명서
32
-e164
e164 number, which is registered as phone number in
gatekeeper.
gatekeeper.
-alias
h323 ID, a identification in h323 world for other parties’
recognition. The field might be used as a key of authorization or
accounting in some VoIP application. It is recommended to assign
a special name, or it might conflict with other devices.
recognition. The field might be used as a key of authorization or
accounting in some VoIP application. It is recommended to assign
a special name, or it might conflict with other devices.
-gkdis
Switch ON or OFF of gatekeeper discovery function (1 = ON; 0 =
OFF). When it’s ON, VoIP FXO gateway will send GRQ with GK
ID to default gatekeeper. If the GK ID didn’t matched, GW will
send GRQ with GK ID in multicast.
OFF). When it’s ON, VoIP FXO gateway will send GRQ with GK
ID to default gatekeeper. If the GK ID didn’t matched, GW will
send GRQ with GK ID in multicast.
-rtp
to allocate RTP port range—NOT RECOMMENDED. This may be
used when RTP port range conflicts with firewall policy.
used when RTP port range conflicts with firewall policy.
-h245
to assign h.245 port number, NOT AVAILABLE for the moment.
-ttl
to set timer for TTL(Time To Live). VoIP FXO gateway would send
RRQ, with keepAlive, to gatekeeper periodically according to TTL
timer.
RRQ, with keepAlive, to gatekeeper periodically according to TTL
timer.
-gkfind
gatekeeper finding port. Port number, which VoIP FXO gateway
uses it to discover a gatekeeper. Default value is 1718.
uses it to discover a gatekeeper. Default value is 1718.
-gwtype
to set VoIP FXO gateway register mode as terminal or gateway. 0
is for terminal and 1 is for gateway. If set VoIP FXO gateway as
terminal mode, it must be set sysconf –2nddial 1(refer to 5.12).
is for terminal and 1 is for gateway. If set VoIP FXO gateway as
terminal mode, it must be set sysconf –2nddial 1(refer to 5.12).
-ras
to set default gatekeeper RAS port number. Default value, 1719,
is well-known port for RAS communication.
is well-known port for RAS communication.
-range
to allocate dynamic port range, which VoIP FXO gateway may
use.
use.
-respto
response timeout. Max waiting time for 1st response to a new call
(1~200).
(1~200).
-connto
connection timeout. Max waiting time for call establishment after
receiving 1st response of a new call (1~20000).
receiving 1st response of a new call (1~20000).
5.15 [gk] command
This command is to configure embedded simple gatekeeper parameters. If
user doesn’t have a gatekeeper or Micronet Call Manager, VoIP FXO
gateway provides a simple embedded gatekeeper for up to 10 endpoints.
user doesn’t have a gatekeeper or Micronet Call Manager, VoIP FXO
gateway provides a simple embedded gatekeeper for up to 10 endpoints.
usr/config$ gk
Gatekeeper information and configuration
Gatekeeper information and configuration