Motorola 7000 사용자 설명서

The home page displays basic information about the Gateway. This includes the ISP Username, Connection 
Status, Device Address, Remote Gateway Address, DNS-1, and DNS-2. If you are not able to connect to the 
Internet, verify the following:

This is the negotiated address of the Gateway’s WAN inter face. This 
address is usually dynamically assigned.

This is the negotiated address of the remote router to which this Gate-
way is connected.

‘Waiting for DSL’ is displayed while the Gateway is training. This 
should change to ‘Up’ within two minutes. If not, make sure an RJ-11 
cable is used, the Gateway is connected to the correct wall jack, and 
the Gateway is not plugged into a micro filter.

‘No Connection’ is displayed if the Gateway has trained but failed the 
PPPoE login. This usually means an invalid user name or password. 
Go to Exper t Mode and change the PPPoE name and password.

‘Up’ is displayed when the ADSL line is synched and the PPPoE (or 
other connection method) session is established.

‘Down’ is displayed if the line connection fails.

This should be the valid PPPoE username. If not, go to Exper t Mode 
and change to the correct username.

This is the negotiated address of the Gateway’s WAN inter face. 
This address is often dynamically assigned. Make sure this is a valid 
address.
If this is not the correct assigned address, go to Exper t Mode and ver-
ify the PPPoE address has not been manually assigned.