Motorola 7000 사용자 설명서
Administrator’s Handbook
284
802.3ah Ethernet OAM Settings
802.3ah Ethernet in the First Mile (EFM) Operations Administration and Maintenance (OAM) is a group of
network management functions that provide network fault indication, per formance information, and diagno-
sis using special-purpose Ethernet OAM frames. These are exchanged between your Gateway and ser vice
provider Access Node (AN) devices for network fault management, per formance analysis and fault isolation.
network management functions that provide network fault indication, per formance information, and diagno-
sis using special-purpose Ethernet OAM frames. These are exchanged between your Gateway and ser vice
provider Access Node (AN) devices for network fault management, per formance analysis and fault isolation.
All VDSL and Ethernet WAN Motorola Netopia Gateways suppor t Ethernet OAM options.
More Ethernet Packet-Transfer-Mode (PTM) enabled xDSL Motorola Netopia Gateways will suppor t 802.3ah
Ethernet OAM options in future releases.
Ethernet OAM options in future releases.
802.3ah Ethernet OAM exchanges periodic Ethernet OAM hear tbeat frames between the endpoints of the
physical link being monitored, and thus discovers and keeps-alive the Link connectivity and repor ts faults if
the link goes down. Suppor ted OAM request and response types are: remote loopback enable, remote loop-
back disable, variable request, variable response.
physical link being monitored, and thus discovers and keeps-alive the Link connectivity and repor ts faults if
the link goes down. Suppor ted OAM request and response types are: remote loopback enable, remote loop-
back disable, variable request, variable response.
set ethernet oam ah option [ off | on ]
Enables or disables Ethernet OAM. Default is
off.
set ethernet oam ah pass-through [ off | on ]
Enable or disable Ethernet OAM pass-through mode. Default is
off.
Warning: This is a DEBUG feature. Leave it off unless you know exactly what you are doing.
set ethernet oam ah mode [ active | passive ]
Specifies the Ethernet OAM mode. Default is
active.
set ethernet oam ah pdu-size-max [ 64 - 1518 ]
Specifies the Maximum Protocol Data Unit (PDU) size. Default is
1518.
set ethernet oam ah discovery-timer [ 1 - 300 ]
Specifies the discover y timer value for continuity check in seconds. Range is 1 – 300 seconds. Default is
1.
set ethernet oam ah keepalive-timer [ 5 - 305 ]
Specifies the keep-alive timer value in seconds. Range is 5 – 305 seconds. Default is
5.
etheroam ah ping
Sends OAM remote loopback request in active mode.