Netgear WNR2020 N300 전단

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered 

trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. 

Information is subject to change without notice. © NETGEAR, Inc. All rights reserved. 

NETGEAR, Inc.
350 East Plumeria Drive,

San Jose, CA 95134 USA

This product has a unique WiFi network name (SSID) and network key 
(password). The default SSID and password are uniquely generated for 
every device (like a serial number) to protect and maximize your wireless 
security. This information is located on the product label. 

NETGEAR recommends that you do not change the preset SSID or 
password. If you do change the settings, the information on the product 
label does not apply.

Find the preset wireless settings on your router and record them here:

 WiFi network name (SSID) _______________________________
 Network key (password) _________________________________

If you change the preset wireless settings, record them here:

 WiFi network name (SSID) _______________________________

 Network key (password) _________________________________

If necessary to retrieve or update your password, enter
http://www.routerlogin.net

 

in a web browser and log in using the default 

user name (admin)

 

and password (password). 

Select Wireless Settings to locate your wireless password.

To connect your computer or wireless device (such as a smart phone or 
gaming device) and join the router’s WiFi network, you can use either the 
manual method or Wi-Fi Protected Setup (WPS).

Open the software utility that manages your wireless connections on 

the computer or wireless device that you want to connect to your 

router. 
This utility scans for all wireless networks in your area. 

Find and select your wireless network name (SSID).
The SSID is located on the product label.

Enter the network key (password).
The password is located on the product label.

Click the Connect button.

If your computer or wireless device supports WPS (Wi-Fi Protected Setup), 
you can use WPS to join the router’s WiFi network. NETGEAR calls WPS 
Push ‘N’ Connect.

WPS does not support WEP security. You cannot use WPS to 

connect a WEP client to the router’s WiFi network.

Press and hold the WPS/Reset button on the back of the router with 

the end of a paper clip or a similar object for one to three seconds.
The WiFi LED

blinks. 

Within two minutes, press the WPS button on the computer or 

wireless device.
The computer or wireless device connects to the router’s WiFi 
network. 

For help with the WPS button on the computer or wireless 

device, check the instructions or online help that came with that 
computer or wireless device.

You can return the router to its factory settings. Use the end of a paper clip 
or a similar object to press and hold the WPS/Reset button on the back of 
the router for at least four seconds. The Power LED

blinks. The router 

resets and returns to the factory settings.

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your 

You must register your product before you can use NETGEAR telephone 
support. NETGEAR recommends registering your product through the 
NETGEAR website. For product updates and web support, visit 

NETGEAR recommends that you use only the official NETGEAR support 
resources. 

You can get the user manual online at 

or through a link in the product’s user interface.

For the current EU Declaration of Conformity, visit 

For regulatory compliance information, visit 

. 

See the regulatory compliance document before connecting the power 
supply.