Netgear WNHDE111 5GHz 사용자 설명서

2-2

Easy Secure Wireless Setup

These instructions will guide you through connecting the access point to a router. Then, you will 
connect wirelessly using WPS technology.

1. Connect the Ethernet cable from a LAN port on your existing router or gateway to either 

Ethernet port on the Wireless-N Access Point. You can leave the mode switch set to the default 
of Auto, or set it to AP mode (but not to Bridge mode).

2. Connect the power adapter to the unit. Verify that the power light 

is on.

Note: Make sure that the LED on/off switch is on. When it is off, all 

the status lights on the unit will be off, including the power 
light, the Ethernet port lights, and the WPS button will not light 
when pushed.

You are finished with setting up the access point.

WNHDE111 
Access Point

Router/gateway

Internet

Laptop with adapter like the NETGEAR 
WNDA3100 USB Adapter

Power light

WPS button/light