Netgear WNHDE111 5GHz 사용자 설명서

Using Network Management Tools

7-7

For each device, the table shows the IP address, NetBIOS host name or device name (if available), 
and the Ethernet MAC address. To force the unit to look for attached devices, click Refresh.

The configuration settings are stored in a configuration file. You can back up (save) this file and 
retrieve it later. Save your configuration file after you complete the configuration. If the unit fails 
or becomes corrupted, or an administrator password is lost, you can easily re-create your 
configuration by restoring the configuration file.

The configuration settings of the Wireless-N AccessPoint/Bridge are stored within the router in a 
configuration file. You can back up (save) this file to your computer, restore it, or reset it to the 
factory default settings.

From the main menu of the browser interface, under Maintenance, select Backup Settings.

The following sections describe the three available options.

The Restore and Backup options in the Settings Backup screen let you save and retrieve a file 
containing your bridge’s configuration settings.

To save your settings, click Back Up. Your browser extracts the configuration file from the bridge 
and prompts you for a location on your computer to store the file. You can give the file a 
meaningful name at this time, such as comcast.cfg.

Note: If the bridge is rebooted, the table data is lost until it rediscovers the devices. 

Tip: Before saving your configuration file, change the administrator password to the 

default, password. Then change it again after you have saved the configuration file. 
If you forget the password, you will need to reset the configuration to factory 
defaults.