Netgear WNR3500 사용자 설명서

4-12

Customizing Your Network Settings

In the scenario shown, the following conditions must be met for both APs:

•

Both APs must use the same SSID, wireless channel, authentication mode (if any), and 
encryption mode (see information about WEP in 

).

•

Both APs must be on the same LAN IP subnet. That is, all the AP LAN IP addresses are in the 
same network.

•

All LAN devices (wired and wireless computers) must be configured to operate in the same 
LAN network address range as the APs.

•

If you are using DHCP, the Get Dynamically From ISP Gateway radio button in the Internet 
IP Address section of the Basic Settings screen should be selected for all AP devices in the IP 
Address Source section.

You can view or change wireless repeater settings for the wireless router. From the main menu of 
the browser interface, under Advanced, click Wireless Repeating Function to display the 
Wireless Repeating Function screen.