Netgear WGR614v7 사용자 설명서

다운로드
페이지 154
54 Mbps Wireless Router WGR614v7 Reference Manual
Advanced Configuration of the Router
6-7
April 2006
Some online games and videoconferencing applications are incompatible with NAT. The wireless 
router is programmed to recognize some of these applications and to work properly with them, but 
there are other applications that may not function well. In some cases, one local computer can run 
the application properly if that computer’s IP address is entered as the default in the PORTS Menu. 
If one local computer acts as a game or videoconferencing host, enter its IP address as the default.
Configuring the WAN Setup Options
The WAN Setup options let you configure a DMZ server, change the MTU size and enable the 
wireless router to respond to a Ping on the WAN port. These options are discussed below.
 
Figure 6-5:  WAN Setup menu.
Connect Automatically, as Required 
Normally, this option should be checked to enable it. An Internet connection will be made 
automatically after each timeout, whenever Internet-bound traffic is detected. This provides 
connection on demand and is potentially cost-saving in places in Europe for example where 
Internet services charge by the minute. 
If disabled, you must connect manually, using the “Connection Status” button on the Router Status 
screen. This manual connection will stay up all the time without time outs.