Netgear WNDR3400 사용자 설명서

Troubleshooting

8-9

•

Date shown is January 1, 2000.
Cause: The router has not yet successfully reached a Network Time Server. Check that your 
Internet access is configured correctly. If you have just completed configuring the router, wait 
at least 5 minutes, and check the date and time again.

•

Time is off by one hour. 
Cause: The router does not adjust for daylight savings time. In the E-mail screen, select the 
Adjust for Daylight Savings Time check box.

The first steps in solving wireless connection problems are these:

1. Using your wireless card’s setup utility program, make sure that your wireless card can find 

your wireless router.

2. Configure and test with the simplest wireless connection possible, and then add security.

The topics in this section describe these steps.

When you install a NETGEAR wireless card in your computer, a Smart Wizard utility program is 
installed that can provide helpful information about your wireless network. You can find this 
program in your Windows Program menu or as an icon in your system tray. Other wireless card 
manufacturers might include a similar program. 

If you have no specific wireless card setup program installed, you can use the basic setup utility in 
Windows by following these steps:

1. Open the Windows Control Panel, and double-click Network Connections.

2. In the LAN section, double-click Wireless Network Connection.

Use the setup program to scan for available wireless networks. Look for a network name (SSID) of 
NETGEAR or your custom SSID if you have changed it. If your wireless network does not appear, 
check these conditions:

•

•

Is your router’s SSID broadcast enabled? See 

.

•

Is your router set to a wireless standard that is not supported by your wireless card? Check the 
Mode setting, as described in 

.