Netgear JNR1010 사용자 설명서

.You can add WPS devices to your network: 

. The router’s PIN lets you use the WPS PIN method to join 

the wireless network. Selecting this check box disables the PIN, which means the 
WPS PIN method cannot be used.

. By default this check box is selected so that 

when WPS is used to join the wireless network, the router wireless settings do not 
change.

. Click the Set Up Access List button display the 

Wireless Card Access List screen. You can restrict access to your network to specific 
devices based on their MAC address. 

Click the Apply button.

Restrict Wireless Access by MAC Address

You can create a list of computers and wireless devices that are allowed to join the wireless 
network. This list is based on the unique MAC address of each computer and device.

Each network device has a MAC address, which is a unique 12-character physical address, 
containing the hexadecimal characters 0¡V9, a¡Vf, or A¡VF only, and separated by colons (for 
example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of the wireless 
card or network interface device. If you do not have access to the label, you can display the 
MAC address using the network configuration utilities of the computer. You might also find 
the MAC addresses in the Attached Devices screen.



Select Advanced > Advanced Setup > Wireless Settings and click Setup Access 
List

. 

The Wireless Card Access List screen displays.

Click Add to add a wireless device to the wireless access control list.

The Wireless Card Access Setup screen opens and displays a list of currently active 
wireless cards and their Ethernet MAC addresses.