Netgear JNR1010 사용자 설명서

Wireless Repeating Function 

Select Advanced > Advanced Setup > Wireless Repeating to view or change wireless 
repeater settings for the router. 

You can configure the following wireless repeater settings:

. Select the check box for the 2.4

 

GHz or 5 GHz 

network to use the wireless repeating function.

. This field displays the MAC address for your router for your 

reference. You will need to enter this MAC address in the corresponding Wireless 
Repeating Function screen of the other access point you are using.

. If your router is the repeater, select this check box.

. If your router is the repeater, enter the IP address of the other 

access point.

. If your router is the repeater, selecting this check 

box means that wireless clients cannot associate with it. Only LAN client associations are 
allowed.

If you are setting up a point-to-point bridge, select the Disable Wireless Client 

Association check box. 

If you want all client traffic to go through the other access point (repeater with wireless 

client association), leave the Disable Wireless Client Association check box cleared.

. If your router is the repeater, enter the MAC address for the 

access point that is the base station.

. If your router is the base station, select this check box.