Netgear WNR1000v3h2 사용자 설명서

Recording Basic Wireless Settings Setup Information

Before and after customizing your wireless settings, print this section, and record the 
following information. If you are working with an existing wireless network, the person who 
set up or is responsible for the network can provide this information. Otherwise, you must 
choose the settings for your wireless network. Either way, record the settings for your 
wireless network in the spaces provided.

Wireless Network Name (SSID). ______________________________ The SSID 

identifies the wireless network. You can use up to 32 alphanumeric characters. The SSID 
is case-sensitive. The SSID in the wireless adapter card must match the SSID of the 
wireless router. In some configuration utilities (such as in Windows XP), the term 
“wireless network name” is used instead of SSID. 

If WEP Authentication is used, circle one: Shared Key or Auto. 

If you select Shared Key, the other devices in the network will not 

connect unless they are also set to Shared Key and are configured 
with the correct key.

You can restrict access to only trusted computers so 
that unknown computers cannot wirelessly connect 
to the WNR1000v3h2 router. MAC address filtering 
adds an obstacle against unwanted access to your 
network by the general public, but the data broadcast 
over the wireless link is fully exposed. This data 
includes your trusted MAC addresses, which can be 
read and impersonated by a hacker.
For more information, see 

Modify your firewall’s rules.

By default, the firewall allows any outbound traffic 
and prohibits any inbound traffic except for 
responses to your outbound traffic. However, you 
can modify the firewall’s rules.
For more information, see 

Use the Push 'N' Connect feature (Wi-Fi Protected 
Setup).

Wi-Fi Protected Setup provides easy setup by 
means of a push button. Older wireless adapters and 
devices might not support this. Check whether 
devices are WPS enabled.
For more information, see