Netgear WNR1000v3h2 사용자 설명서
Chapter 3: Restricting Access From Your Network
|
47
N150 Wireless Router User Manual
b. Enter the e-mail address to which logs and alerts are sent in the Send To This
E-mail Address field. This e-mail address will also be used as the From address. If
you leave this field blank, log and alert messages will not be sent by e-mail.
3.
If your e-mail server requires authentication, select the My Mail Server requires
authentication check box.
a. Enter your user name for the e-mail server in the User Name field.
b. Enter your password for the e-mail server in the Password field.
a. Enter your user name for the e-mail server in the User Name field.
b. Enter your password for the e-mail server in the Password field.
4.
You can specify that logs are automatically sent by e-mail with these options:
•
Send alert immediately. Select this check box for immediate notification of
attempted access to a blocked site or service.
•
Send Logs According to this Schedule. Specifies how often to send the logs:
Hourly, Daily, Weekly, or When Full.
-
Day. Specifies which day of the week to send the log. Relevant when the log is
sent weekly or daily.
-
Time. Specifies the time of day to send the log. Relevant when the log is sent
daily or weekly.
If you select the Weekly, Daily, or Hourly option and the log fills up before the specified
period, the log is automatically e-mailed to the specified e-mail address. After the log is
sent, the log is cleared from the Wireless Router’s memory. If the Wireless Router cannot
e-mail the log file, the log buffer might fill up. In this case, the router overwrites the log
and discards its contents.
period, the log is automatically e-mailed to the specified e-mail address. After the log is
sent, the log is cleared from the Wireless Router’s memory. If the Wireless Router cannot
e-mail the log file, the log buffer might fill up. In this case, the router overwrites the log
and discards its contents.
5.
Click Apply to save your settings.
So that the log entries are correctly time-stamped and sent at the correct time, be sure to set
the time as described in the next section.
the time as described in the next section.
Setting the Time Zone
The WNR1000v3h2 router uses the Network Time Protocol (NTP) to obtain the current time
and date from one of several network time servers on the Internet. Localize the time zone so
that your log entries and other router functions include the correct time stamp.
and date from one of several network time servers on the Internet. Localize the time zone so
that your log entries and other router functions include the correct time stamp.
46):
•
Time Zone. To select your local time zone, use the drop-down list. This setting is used for
the blocking schedule and for time-stamping log entries.
•
Automatically Adjust for Daylight Savings Time. If your region supports daylight
savings time, select this check box. The router will automatically adjust the time at the
start and end of the daylight savings time period.
start and end of the daylight savings time period.