Netgear WNR1000v3h2 사용자 설명서

The IRC server sends a return message to your router using the NAT-assigned source port 

(as in the previous example, let’s say port 33333) as the destination port. The IRC server 

also sends an “identify” message to your router with destination port 113.

Upon receiving the incoming message to destination port 33333, your router checks its 

session table to determine whether there is an active session for port number 33333. 

Finding an active session, the router restores the original address information replaced by 

NAT and sends this reply message to your computer.

Upon receiving the incoming message to destination port 113, your router checks its session 

table and learns that there is an active session for port 113, associated with your computer. 

The router replaces the message’s destination IP address with your computer’s IP address 

and forwards the message to your computer.

When you finish your chat session, your router eventually senses a period of inactivity in the 

communications. The router then removes the session information from its session table, 

and incoming traffic is no longer accepted on port numbers 33333 or 113.

To configure port triggering, you need to know which inbound ports the application needs. 
Also, you need to know the number of the outbound port that will trigger the opening of the 
inbound ports. You can usually determine this information by contacting the publisher of the 
application, or user groups or newsgroups.

Only one computer at a time can use the triggered application.

How Port Forwarding Changes the Communication Process

In both of the preceding examples, your computer initiates an application session with a 
server computer on the Internet. However, you might need to allow a client computer on the 
Internet to initiate a connection to a server computer on your network. Normally, your router 
ignores any inbound traffic that is not a response to your own outbound traffic. You can 
configure exceptions to this default rule by using the port forwarding feature. 

A typical application of port forwarding can be shown by reversing the client-server 
relationship from our previous Web server example. In this case, a remote computer’s 
browser needs to access a Web server running on a computer in your local network. Using 
port forwarding, you can tell the router, “When you receive incoming traffic on port 80 (the 
standard port number for a Web server process), forward it to the local computer at 
192.168.1.123.” The following sequence shows the effects of the port forwarding rule you 
have defined:

The user of a remote computer opens Internet Explorer and requests a Web page from 

www.example.com, which resolves to the public IP address of your router. The remote 

computer composes a Web page request message with the following destination 

information: 

The destination address is the IP address of www.example.com, which is the address 

of your router.

The destination port number is 80, the standard port number for a Web server 

process.